Replacing the Grass Deflector
 
Preceding Page In Manual:

"Removing the Bagger"Page 15Next Page In Manual:

"Operating Tips"

1. Remove the locknut, bolt, spring and spacer holding the deflector to the pivot brackets. Remove damaged or worn grass deflector.

2. Place spacer and spring onto grass deflector. Place the L end of spring behind deck edge.

Note: Make sure the L end of spring is installed behind deck edge before installing the bolt as shown.

3. Install bolt and nut. Place J hook end of spring around grass deflector.

Important: The grass deflector must be able to lower down into position. Lift the deflector up to test that it lowers into the full down position.